We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for SUS304 products.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

SUS304 products Product List and Ranking from 4 Manufacturers, Suppliers and Companies

SUS304 products Product List

1～15 item / All 15 items

Displayed results
Double torsion spring SUS304-WPB Φ0.8

Double torsion spring SUS304-WPB Φ0.8

We handle not only the manufacturing of double torsion springs but also the design and prototyping.

The material used is "spring stainless steel wire - SUS304-WPB." It is a double torsion spring, which may be a bit difficult to understand as it consists of two twisted springs connected together. Due to small lot production, we combine multi-forming machines and handmade processes for manufacturing. Dimensions that are difficult to measure with calipers are measured and managed using a projector. In our company, we not only manufacture double torsion springs but also handle design and prototyping. If you provide us with general conditions, we will propose the optimal specifications. If you have any issues with double torsion springs, please feel free to consult us. Our technical staff will respond carefully. Tsuruoka Spring Co., Ltd. Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web meetings.

  • Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stop fastener, stainless steel wire for springs, SUS304-WPB Φ1.0

Stop fastener, stainless steel wire for springs, SUS304-WPB Φ1.0

After forming, heat treatment is performed to remove processing strain.

The material used is "spring stainless steel wire - SUS304-WPB." It is wire forming with 10 bending processes. After shaping, heat treatment (low-temperature annealing) is applied to remove processing strain. Our company specializes in wire forming processing. We have experience with various materials and shapes, so please feel free to consult us if you have any concerns. Phone: 0235-22-0407 Contact: Ujiie Tsuruoka Spring Co., Ltd. Phone: 0235-22-0407 Fax: 0235-22-0546 Email: web@tohj.com

  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tension Spring Brake Spring SUS304-WPBΦ2.0

Tension Spring Brake Spring SUS304-WPBΦ2.0

The opposing angle of the hook is managed according to internal standards.

The material used is "spring stainless steel wire - SUS304-WPB." This spring requires the hooks at both ends to be fixed with screws during assembly, making the opposing angle of the hooks important. Therefore, we manage the opposing angle of the hooks with a rather strict tolerance of "±5 degrees." According to JIS standards, the allowable tolerance for the opposing angle of the hooks is defined as "by agreement between the parties." In fact, it does not explicitly specify "plus or minus how many degrees." Our company has established internal standards separate from JIS standards to manage the opposing angle of the hooks. Additionally, if customers have stricter requests, we respond as much as possible by creating limit samples and other means. If you have any issues with springs, please feel free to consult us. Our technical staff will respond carefully. Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com Tsuruga Spring Co., Ltd. for springs We also support web meetings.

  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wire forming SUS304-WPBΦ1.2

Wire forming SUS304-WPBΦ1.2

Since spring materials are sensitive to scratches, they are shaped to avoid tool marks.

The material used is "spring stainless steel wire SUS304-WPB." It is shaped using a multi-forming machine. Since the spring material is hard, it is sensitive to scratches. Therefore, we take great care to wrap the processing tools to prevent scratches from the tools on the bending parts. Additionally, we perform a double-check using a magnifying glass to prevent the occurrence and leakage of scratches. Our company specializes in wire forming processing. Please feel free to contact us if you have any concerns. Tsuruga Spring Co., Ltd. for springs Technical contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com

  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Float-type level sensor made of SUS304(316) (vertical mounting type)

Float-type level sensor made of SUS304(316) (vertical mounting type)

Resin vertical mount float level switch for water, oil, and chemicals. Compact design, easy to use, and economical.

【Model】 ■RFS-2 【Specifications】 ■Body Material: SUS304 (316) ■Float Material: SUS304 (316L) ■Operating Temperature (at atmospheric pressure): -40℃ to +120℃ ■Pressure Resistance (at room temperature): 1MPa 【Remarks】 We offer a wide variety of sizes, functions, and performances, from large capacity tanks to equipment integration. Upon request, we can accommodate custom specifications regarding body length, number of floats, float size, terminal box, flange specifications for side mounting, and more, covering materials, structure, performance, and cost. *For more details, please refer to the related links or feel free to contact us.

  • Level gauges and level switches

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SUS304(316) made float type level sensor (horizontal mounting type)

SUS304(316) made float type level sensor (horizontal mounting type)

Resin horizontal mount float level switch for water, oil, and chemicals. It can be installed in tanks of various depths by simply making a small hole in the side of the tank.

【Model】 　■RFS-4 【Specifications】 　■Body Material: SUS304(316) 　■Float Material: SUS304(316L) 　■Operating Temperature (Atmospheric Pressure): -40℃ to +120℃ 　■Pressure Resistance (Room Temperature): 1MPa 【Remarks】 　We offer a variety of sizes, functions, and performances, from large capacity tanks to equipment integration. 　We can accommodate custom specifications based on your needs, including body length, number of floats, float size, terminal box, flange specifications for side mounting, and more, covering materials, structure, performance, and cost. *For more details, please refer to the related links or feel free to contact us.

  • Level gauges and level switches

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hook with ring, stainless steel wire for springs, SUS304-WPB Φ0.8

Hook with ring, stainless steel wire for springs, SUS304-WPB Φ0.8

Spring stainless steel wire SUS304-WPB has a strength approximately 1.7 to 3.2 times greater than that of ordinary stainless steel wire SUS304.

The material is "spring stainless steel wire SUS304-WPB," with a wire thickness of Φ0.8. This is a prototype hook for suspending medical devices. Since a certain level of strength is required, spring stainless steel wire is used instead of regular stainless steel wire. Spring stainless steel wire SUS304-WPB has approximately 1.7 to 3.2 times the strength of regular stainless steel wire SUS304, allowing for miniaturization and weight reduction. As it was a small order for a prototype, it was handmade. It was shaped using a combination of general-purpose bending molds and subjected to heat treatment (low-temperature annealing) to eliminate residual stress. Our company specializes in spring processing and wire bending. Please feel free to consult us if you have any concerns. Tsurugaoka Spring Co., Ltd. Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com

  • Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Twisted spring hinge spring SUS304-WPBΦ4.5

Twisted spring hinge spring SUS304-WPBΦ4.5

By processing the initial tension to a lower level, we can reduce the impact on the moment (torque).

The material used is "spring stainless steel wire - SUS304-WPB." The wire thickness is Φ4.5. The body part is processed by winding on a winding machine, and the arm part is bent by hand. After spring forming, heat treatment (low-temperature annealing) is applied to remove processing strain. For "torsion coil springs" like hinge springs, the initial tension is processed to be as weak as possible. Initial tension refers to the force that causes the wires in the coil to try to adhere to each other, and if this initial tension is strong, it affects the torque (moment) when twisted. In the case of "tension coil springs," on the contrary, this initial tension is utilized to control the load. If you have any issues with "springs" or "springs," please feel free to consult us. Our technical staff will respond carefully. Tsuruga Spring Co., Ltd. for springs and springs Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web meetings.

  • Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Oval spring SUS304-WPB Φ1.2

Oval spring SUS304-WPB Φ1.2

The coil part is coiled in an elliptical shape rather than a circular one.

We received a request from a customer for "compression springs that fit perfectly in a vertically long space." The result, which meets the requirements for free length, installation, and maximum load, is this oval spring. This is a spring coiled in an oval shape (not exactly oval, but elongated oval) rather than a round coil. The material used is round wire "spring stainless steel wire, SUS304-WPB." We have processing experience with similar shapes using "piano wire (SWP-A, SWP-B)" and "beryllium copper wire (C5191W)." If you have any issues with springs, please feel free to consult us. Our technical staff will respond carefully. Turuoka Springs Co., Ltd. Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web conferencing.

  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Twisted spring, stainless steel wire for springs, SUS304-WPB Φ0.45

Twisted spring, stainless steel wire for springs, SUS304-WPB Φ0.45

There are materials that exist according to JIS standards but have low marketability.

The material used is "spring stainless steel wire SUS304-WPB." According to JIS standards, "spring stainless steel wire" is classified into types A, B, C, and D. Although "SUS304" does have a type A variant, "SUS304-WPA," in JIS standards, its market presence is virtually nonexistent. This is likely because the stronger type B, "SUS304-WPB," is widely adopted. In this way, there are actually quite a few materials that "exist according to JIS standards but have low marketability." Even for such materials with low marketability, wire manufacturers may accommodate special orders. If you have any issues not only with "springs" but also with spring materials, please feel free to consult us. Our technical staff will respond carefully. Tsurugaoka Spring Co., Ltd. Technical Contact: Ujiie Phone: 0235-22-0407 FAX: 0235-22-0546 Email: web@tohj.com We also support web conferencing.

  • Spring

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
△▽△Piping Cover Custom Order △▽△ SUS304

△▽△Piping Cover Custom Order △▽△ SUS304

We accommodate your desired dimensions. Semi-custom product.

R43・R87 thin plate sheet metal processed products Utilizing our unique know-how with FR bending, rolling machines, and special molds, we will manufacture to your desired dimensions. We can accommodate single items as well.

  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
△▽△Short delivery time: about 1 month! Large-scale can manufacturing △▽△ SUS304

△▽△Short delivery time: about 1 month! Large-scale can manufacturing △▽△ SUS304

Production from drawing development and material arrangement to painting takes about one month! We also handle assembly confirmation within the factory before shipping.

We would like to introduce a case study of "Short Delivery Response for Large Canned Products" conducted by Shoei. The size is φ3600 x L=7700, and the weight is approximately 5 tons. Using a 20-ton crane, we manufactured this product from material procurement to painting in about one month. We have established a system for integrated production in-house up to the painting stage, allowing for short delivery times. Additionally, we also accommodate assembly confirmations within the factory before shipment. 【Specifications】 ■ Material: Steel, Stainless Steel ■ Lot: 1 to 100 pieces ■ Accuracy: Within general tolerance range *For more details, please refer to the PDF document or feel free to contact us.

  • CIMG3687.JPG
  • CIMG3701.JPG
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Float-type level sensor made of SUS304(316) (vertical mounting type)

Float-type level sensor made of SUS304(316) (vertical mounting type)

Vertical mounting float level switch made of resin for water, oil, and chemicals. Compact design using high-sealing tapered screws.

【Model】 　■RFS-2R 【Specifications】 　■Body Material: SUS304(316) 　■Float Material: SUS304(316L) 　■Operating Temperature (at atmospheric pressure): -40℃ to +120℃ 　■Pressure Resistance (at room temperature): 1MPa 【Remarks】 　We offer a wide variety of sizes, functions, and performance options, from large capacity tanks to equipment integration. 　We can accommodate custom specifications based on your needs, including body length, number of floats, float size, terminal box, flange specifications, side-mounted types, and more, covering material, structure, performance, and cost. *For more details, please refer to the related links or feel free to contact us.

  • Level gauges and level switches

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SUS304(316) made float type level sensor (vertical mounting type)

SUS304(316) made float type level sensor (vertical mounting type)

Vertical mount float level switch made of resin for water, oil, and chemicals. Compact and pressure-resistant type usable up to MAX. 2MPa.

【Model】 　■RFS-2Z 【Specifications】 　■Body Material: SUS304(316) 　■Float Material: SUS304(316L) 　■Operating Temperature (at atmospheric pressure): -40℃ to +120℃ 　■Pressure Resistance (at room temperature): 2MPa 【Remarks】 　We offer a wide variety of sizes, functions, and performances, from large capacity tanks to equipment integration. 　We can accommodate custom specifications regarding body length, number of floats, float size, terminal box, flange specifications for side mounting, and more, tailored to your needs in terms of material, structure, performance, and cost. *For more details, please refer to the related links or feel free to contact us.

  • Level gauges and level switches

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SUS304 -6F

SUS304 -6F

SUS304 -6F (Tolerance: -0 to +0.1 Full Circumference Itomen)

This product will arrive at your hands with milling processing (full circumference finish), providing you with the benefits of shortened processes. If you have specific dimensions in mind, you can request a quote/order through the related link here.

  • Special Steel
  • stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.